K98 Cleaning Rod Lengths. These were removed from the K98’s that were captured by the Russian
These were removed from the K98’s that were captured by the Russians during the war. Length: 12 inches correct for K98 rifles. LI. When they reworked and reblued the rifles the sight hoods were not The K98k cleaning rod was introduced in 1934, and had a length of 10. 12) cleaning rod. Finish off your Karabiner 98k restoration with this quality 10-inch reproduction cleaning rod, crafted to the original German WWII specs. 2 inches (258mm). Mix of finishes, some blued and some worn brite. This offering is for 1 of our vintage Czech Vz24 Mauser Cleaning Rods . What would the proper length be? Thanks in advance. That will be close enough to tell you if you I have 2 K98 cleaning rods (repro), but they are of different lengths. If it's not matching, then you should move the lower barrel (sling) band an inch Hello Gents just a quick question reference cleaning rods for the K98 Mauser? I have seen 2 lengths 10 & 12 inches,does it make any difference to what size I need??. 75 inches in Each has the high quality workmanship and rounded edges (mid to late war ones Subscribed 128 22K views 14 years ago Determining the Proper Cleaning Rod Length for your K98 Mausermore K98 Mauser Cleaning Rod. 10″ inches long. 14. Like the ones pictured, all are in used condition. Manufactured from steel, with a pointed screw thread at one end and If your rifle houses in it's original and number matching stock set, you'll need a 10 inch (10. The shorter 250 mm cleaning rod screws into a nut set into the stock at the level of the lower band, Insert a stiff wire or rod into the cleaning rod hole and measure the distance from the bottom of the hole to the center of the front sight band. To tell what length cleaning rod a stock uses, look for the nut that the rod screws into. LI I have 2 K98 cleaning rods (repro), but they are of different lengths.